Mesto Universal Plus F1.5 Pressure Sprayer

PRODUCT SAFETY INFORMATION

Devices may not be used for spraying plant protection liquids.

Only trained, healthy and rested people may work with the device. You should not be under the influence of alcohol, drugs or medication.

Children and adolescents must not use the device. Keep the spraying devices safe from access to children.

Take precautions to prevent hazardous substances from being misused.
→ Accident risk!

Keep bystanders away during spraying.

Never spray on people, animals, electrical devices and lines, into the wind, or into bodies of water.
→ Risk of injury!

Wear appropriate protective clothing, goggles and respiratory protection in line with the applicable national regulations when working with hazardous substances.

Avoid ignition sources in the environment.

Do not allow the device to remain under pressure and/or exposed directly to sunlight. Make certain the device is not heated beyond the maximum operating temperature. (→Table 1).

Protect the device from frost and ammonia.
Never blow through the nozzles or valves with your mouth.
→ Risk of poisoning!

There is a risk of slipping or tripping on smooth or wet surfaces, snow, ice, on slopes and on uneven terrain.

Repairs and modifications to the device are not permitted. Have damaged parts or parts that do not work properly repaired immediately by our customer service department or by service partners authorized by us.

The effect of the safety valve must not be bypassed or made inoperative.
→ Explosion hazard!

Use only original spare and accessory parts. We cannot assume any liability resulting from the use of third-party parts.

When pumping, always observe the pressure gauge to ensure the maximum
spraying pressure is not exceeded (→ Table 1).

All excess pressure must be released from the device before filling, after use, before carrying out maintenance work, on work breaks, and before placing it in storage.

Points to note when transporting the device: Transport the device in such a way that it is protected against damage and tipping. All excess pressure must be released from the device.
→ Explosion hazard!

If the device leaks at the container, immediately depressurise the device and put it out of operation!
→ Risk of explosion!

Product class Profi ***
Spraying agents Impregnating agents, Acid detergents, Acid disinfectants
Product label Promotional campaign
EAN 4000903313234
Fill capacity 1.5 l
Total contents 1.7 l
Weight 0,48 Kg
Article type Pressure sprayers
Industry Cleaning, Industry
Applications Disinfecting, Impregnating, Preserving, Cleaning
Max. operating pressure 3 bar/44 psi/0.3 MPa
Tank material Plastic transparent
Portability hand portable
Nozzle type Spray nozzle, Adjustable: Spot to full jet
Nozzle material Plastic
Spray wand material Plastic
Spray wand length 5 cm
Safety valve ja
Pressure gauge without
Compressed air filler valve no
Scope of delivery general tank, Nozzle(s), Instructions for use, Pump, Spray wand

Device equipment: Extra large filler opening for simple filling.,

Embossed level scale to monitor the level at all times. Completely enclosed spray head is easy to clean and protects against malfunctioning due to contamination.

2 in 1 valve enables automatic pressure release in case of overpressure and manual pressure release, if required., Ergonomic handle for comfortable working.

Adjustable nozzle from spot jet to fine, even atomization.